分站

headphone modification - best website to buy headphones

by:Bodio Electronic     2020-04-25
headphone modification  -  best website to buy headphones
There is no time to unlock your headphone line, and there is no time to break your headphone line and have to buy a new pair of headphones.
But not anymore.
Now, turn your boring wired headset into a removable wire so that the next time you break the wire, you don't need to buy a new one and you don't need to waste time fixing it.
Just buy a new AUX cable.
I used Skullcandy hesh1 in this project and you can use any headphones.
Tools: soldering iron flux screwdriver super glue or melt pieces: a nice pair of headphones (
I have used Skullcandy hesh 1 and it has enough space to insert 3.
There are 5mm jacks inside)
Or, The Wire was pulled out due to an accident and the headphones were broken.
Spare headphone jack auxiliary cable with 3 on both sides. 5 mm jack (
In this project I made my own aux cable with the same headphone cable but you can buy the cable).
Get your parts and make sure they work properly.
A 5mm jack for an old broken mp4, but you can even buy it from the store and they are very cheap.
Remove the headphones to ensure no screws are lost (
They are small).
If you look closely at the inside of the headset, there should be three lines 1.
Left head power 2 red.
The right head power supply and the blue color of 3.
The gold ground color of different brands is different.
There may be gold lines (ground wire)
In some headphones you can weld them together.
Remove the cable from the headset. Drill a hole.
I drilled a hole in the wire from there and filed it.
Make sure it's big enough to fit your 3.
The 5mm jack is then glued to the head phone with glue.
After welding all the wires separately with the Jacks and making sure they work, put the screws back in place.
Now you can make a new auxiliary cable with the wires on your headphones.
Now just plug in your cable and enjoy your music. ! ! ! ! ! !
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...